![]() ![]() Unplug the flasher from the PC and plug it in again. Start PDFSUSB and flash PICFLASH.hex to it. Solder it together, plug it in by USB, it will be recognized as Custom USB device, use the driver in "Driver for PDFSUSB". Some connectors for USB, the jumper and the SPI output/input (thanks to DarkstarTM, cory1492, Straßenkampf and all others who were involved) Remove the both hooks from invert in the configuration, before programming. You need an external 5V supply, for this you can use a USB cable, cut it.ĭownload PicPGM, plug the PIC onto the programmer, plug it in and use PicPGM to flash PicXBoot.hex Schematics for the Programmer and programming the PIC The easiest to build programmer is ART2003.Īnother programmer is the TAIT Classic Programmer. The flasher is built with PIC 18F2550, which is the cheapest out there.īefore you can build the flasher you need to program the PIC. I am not sure if the program "PDFSUSB" is freeware/shareware so i removed it. But you can use a pci-lpt-card, which normally doesnt work with nandpro. Unfortunatly if you dont have a LPT-port you wont be able to program the PIC, which is used in the flasher. It is very easy to build and costs about 25€. With this Flasher you can read or write the xbox 360's nand. 3.2.2 Schematics for the Programmer and programming the PIC. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |